Universal Heads up Display, M17 HUD Upgrade Dual Mode OBD2/GPS Windshield Projector

M17 Upgrade Universal Car HUD Dual Mode OBD2/GPS Windshield Projector, More functions than M12

• 【HUD Display OBD II/GPS】It displays driving datas on the front windshield such as speed,RPM,water temperature,voltage,single mileage etc;to avoid drivers unsafety because of watching the instrument while driving.Drivers can read the driving information instantly , and can always keep the best state on the way with HUD.
• 【BIG SCREEN & CLEAR DISPLAY】The Nano-Technology – High clearness projector, to eliminate unwanted reflections and can make the display information more sharper,it is pretty clear in the sunny day,rainy day.Muti color makes it look more vivid and more comfortable. Light sensor:HUD can automatically adjust the brightness according to the environment,It will bring more fun and Technological sense to your driving experience.
• 【PLUG & PLAY】With the button function,you can easily set up and switch various functions you need.There are two USB ports,you can choose one according to your needs(Note:only one interface needs to be connected.Plugging in two ports at the same time could burn out your car.) OBD2 mode is only applicable to most vehicles manufactured after 2008.The GPS mode is perfect for all vehicles.(if your car is not OBD compatible,use GPS mode.)Dual System,Change free.
• 【Safe Driving】This unit has equipped with 2 cables:OBD2 and USB cable.We do not need to damage your car but just plug them in,then you can use it and modify your car.This car HUD device has a detection for error code and make a alarm.such as low voltage alarm,over speed alarm,Fatigue driving alarm,high water temperature alarm,engine fault code alarm.These reminders help you avoid the accidents to keep the car in good condition, keep your driving safely.
• 【Quality service】CE FCC RoHS Certification, Superior quality. The chip with powerful performance and compatibility to make sure dual system, dual-run memory and dual-core processor high-speed operat.If you have any questions about this product, please feel free to contact us.The operating steps of the updated manual are clearer.

Multi-function

• Function of OBD mode: Speed, Engine RPM, Voltage, Fuel Consumption, Water Temperature, Driving Time, Driving Distance, Altitude, Power Test, Time, Compass, Satellite, Automatic Light Adjustment, Mile Switch, °C/°F Switch, Alarm Sound Switch Automatic Turn ON/OFF, Overspeed Alarm, Engine RPM, Voltage Alarm, Water Temperature Alarm, Fatigue Driving

• Function of GPS mode: Speed, Voltage, Time, Altitude, Driving Time, Driving Distance, Power Test, Compass, Satellite, Automatic Light Adjustment, Mile Switch, Alarm Sound Switch, Automatic Turn ON/OFF, Overspeed Alarm, Engine RPM, Voltage Alarm, Water Temperature Alarm, Fatigue Driving

• Compared with GPS mode, OBD mode has more functions than GPS mode: Engine RPM, Water temperature, Fuel consumption, Fault code clearance, Engine RPM alarm, Water temperature alarm. Because OBD mode is based on car to read data, and GPS mode is based on satellite signal to read data.

COMPATIBLE ATTENTION

• This product just available for cars with OBD2 agreement and EU-OBD agreement.OBD model is not compatible with hybrid electric vehicle,diesel car, pickup truck, RV, computer modified car,it is recommended to use the GPS system.The GPS mode is perfect for all vehicles.(if your car is not OBD compatible,use GPS mode.)Dual System,Change free..OBD2 mode is only applicable to most vehicles manufactured after 2008.
• Please manually turn off the HUD,when you don’t drive your car for more than a week.Standby current is 20ma around of OBD devices so that the use time of a common battery is 1 month,surely,situation of each car is different,we recommended to unplug the OBD device if your car doesn’t been used for a long time.

More details

HOW TO SWITCH BETWEEN KM/H AND MPH？

• After the HUD boots up and stops flashing, long press the “M” button for 5 seconds to enter setting mode (1-14). Short press the “M” button to switch to item 9, then you can adjust the speed unit (0 is Km/h, 1 is MPH/h)
• by pressing “+”, “-“.Finally, press and hold the “M” button for 2 – 3 seconds to save and exit.

SPEED DATA HAS SLIGHT ERRORS

• Since this product is designed to remind drivers not to overspeed, the speed displayed by this device may be 5-10km /H faster than the speed of the car.
• When the product is power on, long press the M button for 5 seconds to enter menu option 1, then press the M button for 1 second to set the value, adjust it according to your own vehicle, and finally long press the M button for 5 seconds to save it

THE PROJECTION HAS A SLIGHT GHOSTING

• Because the car’s glass is double glazed, the device will have slight ghosting, but it will not affect the use. If the reflective film (contained in the package) is used, the slight ghosting will not occur.
• Please tear off the protective film before using this product, otherwise it will affect the clarity of the projection.

OBD Troubleshooting:

• 1.The screen without any display, and no power
• Please do these operations: If OBD cable is tight enough,pull the OBD cable out several times. Try another car to test.
• 2.When HUD power on,HUD only shows the car voltage and be automatic power off after 30 seconds driving.
• HUD is only available for cars with OBD2 and EOBD agreement(European:manufactured after 2003, Other region: after 2007). HUD Products don’t support JOBD and OBDI,if your car is these agreement,Please switch to the GPS system for display. After power on, the screen flickers. Press the ‘+’ key within 5 seconds to switch the GPS system.
• 3. Inaccurate speed
• In the case of power-on,long press the ‘M’ button in to enter into menu option,menu displays 1,parameter displays 107.Fine tuning of the values according to the difference between HUD and car instrument(Example:the instrument displays 100 KM but HUD displays 105KM,then calculation should be default value 107-5=102.Long press the ‘M’ button to save your adjustment and exit.

GPS Troubleshooting:

• 1. Nothing on the screen, no power
• Check whether the OBD cable or car charger cable is tightly connected,unplug it repeatedly and plug it in several times,or directly plug the cigarette lighter with a USB cable.
• 2. No speed
• GPS blinks for searching numbers ongoing.Please move the car to wide road. It will work after GPS light steady.
• 3. HUD cannot be automatically powered on or repeatedly extinguished while driving
• Long press the ‘M’ key to enter into the setup menu,and adjust the voltage(Menu 10) to 13.0V or 12.8-12.5V.Please plug in the cigarette lighter by USB cable if not be solved still.
• 4. HUD won’t shut down automatically after car goes out
• When the OBD cable is connected, the HUD will automatically turn off after 3 minutes.
• Please adjust the voltage parameter value(Menu10) to 13.5V if it has not been turned off within 5 minutes after car engine stopped,or plug cigarette lighter by USB cable.