Aluminum Alloy Diesel Fuel Tank Sump Kit Ford Dodge Chevy Cummins

• Function: The sump kit reduces the suction point and collects all fuel from the tank into a central location to maximize the availability of fuel. Uses all available fuel from the tank. No issues with sucking air when below ¼ tank.
• No inhalation problems up to 1⁄4 can. Perfect with today’s high-flow lift pump system. (gas dog, FASS, etc.) cut into the inside of the pipe to reduce the deposition of the filter system.
• Can be installed on any fuel tank with an available 4″ diameter flat area

Fitment:

• Ford Dodge Chevy GMC Beans Diesel No Leak
• Silverado Sierra GM Chevrolet F250 F350 2500 3500,2001-2018 6.7 6.7L 6.6 6.6L 5.9 5.9L
• Cummins Duramax Powerstroke LB7 LLY LBZ LMM LML

Specification：

• Brand Name: Furydiesel
• Model Number: FLFS01164
• Material: 6061 Billet Aluminum
• Weight: 850g
• Package Size: 8.27”*4.72”*2.76”

Features:

• Uses all available fuel from the tank. No issues with sucking air when below the tank. Perfect for use with today’s high-flow lift pump systems.
• Standpipe cut into the inside of the sump to reduce the number of sediments that get to your filter system.
• Drain plugs for future tank servicing or sediment draining.
• The single-bolt design allows for a 5-minute install as well as fewer chances for leaks that other tanks’ sumps may have when using multiple bolts drilled into the tank.
• Stainless Steel hardware and Brass Push-lock fitting provided.
• Comes with 3″ hole saw to make the only hole needed in your tank for installation.
• Viton O-ring for sealing that is impervious to diesel fuels.
• Super strong 1 piece machined billet design.
• Can be installed on any fuel tank with an available 4″ diameter flat area

Installation:

• Easy installation. It only needs a 4.5″ diameter flat area on the fuel tank, easy to install about 10 mins after fuel is drained.
• Use a 3” holes saw to cut the hole where you want to install the sump.
• Place top plate through-hole, then thread the stainless bolt through housing and into the top plate.
• Using a 7/32″ Allen key tighten bolt until you have a tight seal, 30-40 ft-lbs. if you have a torque wrench should seal it up just fine.